Start with clear dimensions
Measure the usable room after skirting, columns, and door trim.
Loading
Menu
BEDROOM / SPACE FIT
Leave clearance. Then choose the bed.
Put clear room dimensions, the bed's outer footprint, and foot-of-bed obstacles on one plan before returning to the directory.
01 Measure clear dimensions02 Size for the mattress03 Leave clearance on both sides04 Check foot-of-bed obstacles
THE BASICS
Four checks keep a bedroom from feeling cramped.
The mattress is not the bed
Headboards, upholstery, and footboards add to the outer footprint.
Leave access room
Check both-side access, or identify the one main route when against a wall.
Check the foot of the bed
About 80 cm in front of a wardrobe or door makes opening and passing easier.
QUICK CHECK
Measure the room, then choose the bed
An initial planning estimate. Check headboards, skirting, doors, wardrobe swing, and sockets on site.
Outside bed reference1.96 × 2.20mMattress 1.8 × 2.0m; footprint is estimated.
Side clearance0.04mCombined both sides; 0.60m per side required
Foot-of-bed clearance1.30mAbout 0.8 m is recommended before a wardrobe or door
This is an initial fit; draw the headboard, doors, wardrobe swing, and sockets into the plan.
REFERENCE RANGE
Narrow the choice by mattress size
The table pairs mattress dimensions with outside reference footprints that include headboards and footboards. Upholstery thickness, edging, and modular construction can change the result; confirm the product page.
These are common planning ranges, not fixed standards; use the calculator for initial selection only.
Swipe horizontally to see the full table
| Bed type | Common mattress | Outside footprint | Use note |
|---|---|---|---|
| Single | 1.2 × 2.0 m | About 1.35 × 2.2 m | Children's room, guest room, or single bedroom |
| 1.5 m double | 1.5 × 2.0 m | About 1.65 × 2.2 m | A common starting point for a small primary bedroom |
| 1.8 m double | 1.8 × 2.0 m | About 1.96 × 2.2 m | Common primary-bedroom choice; check clear width first |
| 2.0 m king | 2.0 × 2.0 m | About 2.16 × 2.2 m | More generous, but depends on clear room dimensions |
ROOM RELATION
Draw the bed, wardrobe, and access route together
The bed footprint is only the first layer. Check clearances on both sides and keep a continuous route when a wardrobe or door is at the foot.
MEASURE FIRSTMeasure the bed outline, side clearances, and foot-of-bed clearance together.
Access on both sidesLeave a route on each side
BedWardrobe / door60cm60cm80cm
Against-wall layoutKeep one main route
BedWardrobe / door45cm80cm
BEFORE YOU SELECT
Check the estimate against the real bedroom
- Confirm clear room dimensions, skirting, doors, and curtain swing.
- Confirm the bed's outer footprint and wardrobe or door opening at the foot.
- Use dimensions for initial selection only; confirm final terms through inquiry.